What Happens If Air Conditioning
Installation is Done Wrong
It’s the middle of summer and your home is feeling more like an oven than a place to relax. You know it’s time for air conditioning installation, but you’re not sure how to go about it. Air conditioning installation can be tricky- if it’s done wrong, you could end up with an air conditioning system that doesn’t work properly and ends up costing you even more money in the long run.
Now, we’ll discuss what can happen if an air conditioning installation is done wrong so that you can be prepared before making any decisions.
What are the consequences of having an air conditioning installation done wrong?
Higher energy bills
One of the most common consequences of having an air conditioner installed improperly is increased energy bills. This happens because when your air conditioner isn’t installed properly, it has to work harder to cool your home- which means it uses more energy and costs you more money.
The AC Won’t Heat or Cool Your Home Evenly
Another consequence of having an air conditioning installation done wrong is that your air conditioner won’t be able to heat or cool your home evenly. This means that some rooms will be too cold while others are too hot. Not only is this uncomfortable, but it can also lead to other problems like mold and mildew growth.
Poor air cooling and quality
If your air conditioning installation is done wrong, it can also lead to poor air quality in your home. This happens because when your air conditioner isn’t installed properly, it can allow dust, dirt, and other pollutants into your home. These contaminants can cause health problems for you and your family- so it’s important to make sure that your system is installed correctly.
More noise
If the installation is done incorrectly, it can make a lot more noise than a correctly installed one. The compressor, for example, can be a source of buzzing or whistling noises that are caused by loose insulation or poor installation. This can be extremely annoying and can even disturb your sleep. It’s not just an annoyance—it could also be dangerous to your home and family if the equipment isn’t installed properly and is leaking coolant or oil.
A fire hazard
When you consider the consequences of having an air conditioning installation done wrong, it might seem like a very small problem to have. But in the event that you do get a leak in your air conditioner, the leak could lead to some serious fire hazards inside your home. This is because your air conditioning unit can overheat, which could lead to the unit failing and bursting into flames. If you have an older air conditioning unit, this damage can be even worse since older units use more oil and gas than newer ones.
So, it’s important to make sure that your system is installed correctly to avoid this dangerous situation.
The Air Will Be Drier
If the installation is done wrong, the air in your home will be drier. This happens because when your system isn’t installed properly, it doesn’t circulate the air properly. This can lead to health problems like respiratory infections and nosebleeds.
The HVAC System Won’t Last Long
Another consequence of having an AC installation done wrong is that your system won’t last as long as it should. This happens because when your system isn’t installed properly, it can cause wear and tear on the components. This can lead to costly repairs or even replacements in the future.
The Air Conditioner Will Cause Humidity
If the air conditioner is installed improperly, the system can cause humidity in your home. This happens because when your system isn’t installed properly, it doesn’t circulate the air properly. This can lead to health problems like respiratory infections and nosebleeds. It can also create an environment that is conducive to mold and mildew growth.
How can you make sure that your air conditioning installation is done correctly?
Inspect the ducts.
The ducts are one of the first things to look at to determine whether your HVAC system has been built properly. The air will not be able to enter the air conditioning unit if your vent is damaged and not linked to the outside of your house. Therefore, it’s crucial to make sure that a repairman fixes any holes or loose holes. By doing this, you can be sure that everything is safe and that your air conditioner operates all year long.
Explore The Filters
Additionally, your HVAC unit’s filters might provide useful information about whether or not your unit was fitted correctly. This might be a sign that your air conditioning unit needs to be reinstalled if it has junk in the filters and is not operating as it should.
Although this might take some time, hiring a dependable provider can cut down on the number of times you need to have this replaced before you need a new one installed, thus saving you money.
Check the bills
Monitoring the cost of your energy bill is another approach to finding out whether your HVAC equipment has been installed correctly. If the cost of this cooling unit is more than the original, it may have been installed improperly. At this time, it is crucial to seek the assistance of an air conditioning repair company since they will assist you in correctly reinstalling the unit.
Additionally, if you use a certain installation service, you may be given a guarantee to assist ensure that your product is protected.
Inspect Your Wiring
The wiring is the last component to be examined. This might prevent the device from performing as it should if it is not properly secured or attached. If you discover that your wiring is incorrect in any manner, you should consult a professional rather than attempting to fix it yourself. This is crucial because it will save the device from suffering more damage, which might cause it to stop functioning.
By hiring a professional, you may get your unit installed and operational in a short amount of time, therefore saving you money.
What should you do if you think that your air conditioning installation was not done properly?
If you think that your AC installation was not done properly, the first thing you should do is contact the company that installed it. You should explain the problem and ask for a refund or a discount on future services. If they are unwilling to help, you can contact a local air conditioning service to have the system checked and repaired. It is important to make sure that your system is installed correctly to avoid any of the problems listed above.
Why should a skilled professional install your air conditioner instead of you or an unqualified contractor?
They use proper equipment.
For a variety of reasons, you need to always employ a qualified air conditioning contractor. Possessing the appropriate tools for the work is among the most crucial. Professional installation contractors can do the project fast and effectively since they have access to top-notch equipment. You may be certain that they will do the task appropriately since they are also skilled in using this equipment. The expertise and understanding of a professional air conditioning contractor in correctly installing and servicing your air conditioners is another incentive to engage them.
You won’t have to spend time trying to figure out what’s wrong since they are skilled at problem-solving. If anything goes wrong, they can repair it fast and get your air conditioners operating again. Professional air conditioning installers have insurance and a license. This safeguards you from responsibility if anything goes wrong during installation or maintenance.
Additionally, it offers you comfort to know that the installation contractor you employ is capable of handling the task at hand and will stand behind their workmanship.
They’re tech-savvy.
When installing or repairing your air conditioner, you should always choose a competent air conditioning contractor for a number of reasons.
Professionals remain updated with cutting-edge technology: Recent years have seen significant advancements in air conditioner technology. There’s a considerable possibility that if you attempt to install or repair an air conditioning unit on your own, you’ll pass over some of these more recent features, which might end up costing you in the long run. Professionals, on the other hand, keep up with the most recent technologies, so they can quickly get your air conditioning unit back up and running.
You won’t likely be able to correctly install or repair an air conditioning unit on your own unless you have years of expertise dealing with them. There is a considerable risk that you will make a mistake that might end up costing you a lot of money, even if you are fairly acquainted with the installation procedure.
However, a professional has the training and knowledge required to do the task correctly the first time. If you try to fix your air conditioning unit, you lose the warranty. To maintain your warranty, the majority of manufacturers demand that any installations, repairs, or changes be carried out by a qualified specialist. So, it is recommended to call an installation professional right away if you don’t want to violate your guarantee.
There are several reasons why it’s important to have a skilled professional install your air conditioner.
- First, they have the training and experience to do the job correctly.
- Second, they have the proper tools and equipment to do the job safely.
- Third, they can help you choose the right system for your home and ensure that it is installed correctly. Finally, they can provide you with a warranty on their work.
Remain compliant with local laws
As was earlier noted, installing an air conditioner is a difficult operation. To become a certified professional HVAC installation contractor, you must complete several years of schooling and on-the-job training. These professions get licenses after completing the required coursework and passing certain exams.
You are not permitted to install or repair an air conditioner without this license since you are not considered to be up to date with current rules and laws. As a result, if you attempt a DIY air conditioner installation without the required authorizations, the consequences might be severe.
Professional Ac Installation Save money
Some individuals mistakenly believe they can save money by installing an air conditioner without hiring a qualified HVAC installation contractor. The reality is that installing an air conditioner is a difficult process, and if you try to do it yourself, you run the risk of making errors that might wind up costing you money. You may save money by hiring an air conditioner specialist in a number of different ways.
For instance, hiring a professional to assist you with the installation of your air conditioner can guarantee that it operates well since proper installation is necessary for it to perform at its best. In other words, a professional will complete the work properly, ensuring that your air conditioner doesn’t use more energy than required to maintain a pleasant environment in your house.
Professionals also have the necessary installation training, equipment, and expertise to do the task without significantly harming the surrounding property.
How can you find a reputable and qualified HVAC contractor in your area to install your new AC unit safely and correctly?
You and your family need a heater and air conditioner, so you need to know that the residential HVAC firm you choose is honest, reliable, and knows what it is doing. Here are a few ways to find the best HVAC company:
- Check out the licenses and experience
- Check to see if the HVAC company does home inspections.
- Request references and referrals
- Ask the techs about their installation training and experience.
- Ask for coupons and discounts on HVAC installation services.
The good news is that a qualified HVAC professional like FixIT 24/7 can evaluate your demands and assist you in choosing the ideal HVAC system for your house. There are many HVAC installation contractors in the area, so it can be hard to choose the right one.
Before You Hire an HVAC Technician
Avoid choosing the first installation contractor that comes up in your search when you suspect that your HVAC system is malfunctioning. Before you sign a contract, we advise getting quotations from at least three experts. Although it may seem time-consuming, doing so enables you to:
Quote comparisons
The average cost of a new air conditioner unit can range from $3000-$5000. However, the true cost will depend on the specific unit you need for your home as well as the installation fees. Many companies will give you a quote that includes the price of the unit and installation
Check credentials and references.
Once you have a few companies in mind, be sure to check their credentials and references. You can do this by searching online or asking the company for a list of references. Checking reviews from past customers is also a good way to get an idea of the quality of work you can expect.
Ask the HVAC technician specific AC Installing questions.
Be sure to ask the technician specific questions about your air conditioner unit. For example, you should ask about the SEER rating, which measures the efficiency of your AC unit. A higher SEER rating means your unit will use less energy and save you money on your utility bills. You should also inquire about the type of refrigerant the technician plans to use.
Don’t settle for subpar air conditioning installation. Call FixIT 24/7 today!
As we’ve discussed, installing central AC and HVAC correctly the first time is very important. But what happens when that doesn’t happen? What if problems arise after installation? As we mentioned, it’s likely that you could experience additional costs to get things working properly again. To avoid those, have a professional from FixIT 24/7 come check out your home or learn more about air conditioning maintenance and air conditioner repair . Call (303) 214-0277 now to talk with a professional.
